Recently, when cross-border truck drivers enter the declaration, the system prompts: in order to strengthen the prevention and control of the epidemic, when cross-border truck drivers enter the declaration, they need to fill in the destination code (that is the code of the receiving unit), and the trial operation will be before January 26 At this stage, if you cannot get the location code, please fill in "88888". After January 26, you need to fill in the site code truthfully, otherwise you will not be declared for entry. Please obtain it from the site staff in time. 

1. What does the location code look like in the entry declaration for imported cross-border clearance truck drivers? Where to apply?

      1. Flow chart of entry declaration

      2. Important reminders for entry declaration

      In order to strengthen the prevention and control of the epidemic, the government has strengthened the guidelines for the operation of cross-border truck drivers in places along the “three points and one line”, requiring companies to strengthen the temperature detection of people passing through public places and cross-border truck drivers, and scan them for identification. "Yuekang Code" of information, register body temperature information, etc., for epidemic prevention monitoring。

          1. Enterprise

      Companies can search for the Guangdong Provincial Affairs Mini Program-Yuekang Code-Public Places on WeChat (there is also a video process) to learn about the operation guidelines for places along the "three points and one line". Under this guidance and operation, the registered management personnel of the company will get a site declaration code (6 digits), which is used by inspectors to bind the site, and perform temperature detection and anti-epidemic registration purposes for people passing through the site.

          2. Cross-border truck drivers

      The “site code” required for entry declaration materials for cross-border truck drivers. The number is: letter + 4 digits. After understanding, the “location code” is directly contacted by the street office's epidemic prevention grid staff to reach the enterprise location. , Some of them are requested by the office staff of the sub-district office of the enterprise.

      In the above situation, the site company promptly contacted the street grid staff to obtain the "site code". If you cannot get the location code, you can fill in "88888". The system does not verify the correctness of the location code (that is the code of the receiving unit).

2. What should I do if I still can't apply for the site code?     

The latest situation is organized as follows: 

      1. The Yuekang Code requires the entry declaration of imported cross-border clearance truck drivers, and the location code is required. This matter involves at least 9 cities in the Greater Bay Area where cross-border drivers come to live (including Shenzhen, Guangzhou, Huizhou, Foshan, Zhongshan) , Zhuhai, etc.) 

      2. It has been learned from the enterprises in each district and the commercial departments of each district that the location code that needs to be filled in the entry declaration for imported cross-border clearance truck drivers involved in the Yuekang code has been tightened or suspended, and needs to be further implemented to tighten or relax Policy. (Some companies did not meet the epidemic prevention requirements when they applied before, and some were not able to apply because the policies were tightened and the distribution was suspended when they formally applied.) 

      3. What companies are most concerned about now is: Many companies have reported that some street office anti-epidemic grid staff have suspended the issuance of site codes. In this way, many companies do not have site codes. Can they not be imported? 

      According to the information of the association, companies still have some ways to declare entry in the current epidemic situation. The methods are as follows: 

          1. Go to the entry point to change the driver (only change the driver without unloading, see the connection point location code and address below)  

          2. Go to the unloading point for unloading. (See the attachment for the location code of the unloading point) 

          3. Negotiate the surrounding companies that have obtained the site code, use the site to unload. 

          4. Continue to wait or coordinate with the neighborhood office to apply for the site code. 

      4. It is now known that the access point codes, addresses and general operations set by relevant departments are as follows:

          1. The connection point code and address are as follows:

          2. How to operate inbound vehicles going to the junction?

      Step 1: On the Guangdong Health Entry Declaration page, according to the purpose of entry, the driver can choose to click on the "Delivery and Receiving Operations", "Vehicle to the Connecting Point to Pass the Jockey", and "Nucleic Acid Testing" service entrances to enter the corresponding declaration page.

      Step 2: For cross-border drivers who choose to connect with the connecting jockey at the connection point and connect to the mainland for delivery, please click on the "Vehicle to the connection point to deliver the jockey" service and fill in the relevant information , Including personal information and connecting driver information.

      Step 3: In the connecting driver information part, you need to truthfully fill in the connecting driver’s name, connecting driver’s contact phone number, connecting driver’s certificate number, connecting point number, license plate and other information. Among them, the “connecting point number” must be Cross-border drivers contact the connection point administrator to obtain it. After filling in, you can obtain the driver's entry declaration voucher. At the same time, the connecting driver will receive an SMS notification to inform the relevant connecting information.

      5. Now all street offices share the site code of the unloading yard (it belongs to the public delivery and receiving operation point, which can be unloaded in the same nature as the delivery and receiving operation point of the company's application site code). If the company chooses to go to a public operation point, you can Complete the unloading of cargo at the public operating point:  

          1. Changning Unloading Y0015  

          2. Yonghan Zhichao Unloading Yard Y0016, Longmen County

          3. Sinotrans Depot Y0017  

          4. Gutang Aozhi Super Unloading Y0018  

          5. Parking lot Y0019 of Huizhou Nanhui Storage and Transportation Co., Ltd.  

          6. Longhua Parking Lot Y0020, Huidong County 

          7. Dahegang Wanzhong Parking Lot Y0021, Xinxu Town, Huiyang District, Huizhou City

3. Warm reminder 

      The current situation of epidemic prevention and control measures is still severe, and inbound drivers need to pay attention to the following:

          1. Inbound drivers need to undergo nucleic acid testing every day when entering the country; if the same driver repeatedly enters the country on the same day, random inspections will be used to conduct nucleic acid testing again for prevention and control.

          2. Please manage the site code in accordance with government requirements and implement it in accordance with the policy requirements. If the site code is not approved, the company can enter the country using the above suggested methods.

      However, after entering the country, the driver must follow the promised route of entry, otherwise the entry qualification will be cancelled.